Appliance Shutdown - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION
Appliance shutdown
1
1 Connected load button
2 Display
f Press the connected load button briefly to wake up the dis- f
play. The set connected load flashes.
f Then press the button repeatedly until the required connect- f
ed load appears on the display. The connected load selected
is adopted immediately.
12.1.2 Mini wireless remote control
The mini wireless remote control is factory registered to the ap-
pliance. If no data transmission takes place during commission-
ing, repeat the pairing process (see chapter "Installation options /
Pairing the mini wireless remote control".
12.1.3 Appliance handover
f Explain the appliance function to users and familiarise them f
with how it works.
f Make the user aware of potential dangers, especially the risk f
of scalding.
f Hand over the instructions. f
www.stiebel-eltron.com
12.2 Recommissioning
2
!

13. Appliance shutdown

f Isolate all poles of the appliance from the power supply. f
f Drain the appliance (see chapter "Installation / Maintenance / f
Draining the appliance").
Material losses
To ensure that the bare wire heating system is not dam-
aged following an interruption to the water supply, the
appliance must be restarted by taking the following steps.
f Isolate the appliance from the power supply; do this f
by removing the fuses or switching the appliance to
"OFF".
f Open the tap for one minute until the appliance and f
its upstream cold water inlet line are free of air.
f Switch the power supply back on, or set a tempera- f
ture on the appliance or wireless remote control.
DHE Connect | DHE Touch | 91