Preparation - Stiebel Eltron DHE Connect 18 Utilisation Et Installation

INSTALLATION

Preparation

For use in shower operation, the valve must be set to a maximum
of 55 °C.
9. Preparation
9.1 Installation location
Material losses
!
Install the appliance in a room free from the risk of frost.
f Always install the appliance vertically and near the draw-off f
point.
The appliance is suitable for undersink and oversink installation.
Undersink installation
1 Cold water inlet
2 DHW outlet
www.stiebel-eltron.com
1
2
Oversink installation
2
1 Cold water inlet
2 DHW outlet
Note
f Mount the appliance on the wall. The wall must have f
sufficient load bearing capacity.
DHE Connect | DHE Touch |
1
83