Stiebel Eltron DHE Connect 18 Utilisation Et Installation page 73

OPERATION
Settings
Menu structure
…  WLAN
…  App
…  Bluetooth
…  Registration
…  Termination
…  Appliance name
 „ Service
…  Wireless
… … Pair programming unit
… … Pair other wireless subscribers
…  Fault
… 
Contractor contact
…  Appliance details
…  Service code
www.stiebel-eltron.com
Description
Visible WLAN transmitters are detected automatically (can take up to 1 minute). Make sure that your
router/repeater settings allow additional WLAN subscribers.
Use the "WPS" (Wi-Fi Protected Setup) button for easy wireless home network registration. Alterna-
tively you can input the key manually, or connect to a hidden WLAN network by entering the SSID and
key.
If your WLAN range does not cover your entire home, you may wish to use a wireless repeater. The
repeater increases the WLAN range.
Delete mobile terminal device connections.
®
Set up Bluetooth devices.
Registration for use of extended functions (weather data, internet radio, Bluetooth
DHE Connect.
Terminate registration
Change the appliance name
Menu for setting up the wireless connection between the instantaneous water heater and an external
programming unit or wireless remote control.
Start wireless pairing mode on the programming unit.
Start wireless setup mode in the instantaneous water heater via the programming unit, to set up the
wireless connection to an external programming unit or wireless remote control.
Display appliance faults.
The qualified contractor can store their contact details here for service cases.
Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile termi-
nal device (smartphone or tablet).
Accessible to qualified contractors only.
®
, app) on the
DHE Connect | DHE Touch | 73