Changing The Water In The Boiler; Cup Warmer (Where Applicable) - Faema E71 E Utilisation Et Installation

12. Changing the water in the boiler

1 1
Press the icon .
The water in the boiler must be changed at least once a day.
NOTE: the "WATER CHANGE" function can be programmed by the technical
personnel: in this case, the request message appears at the time set.
More information on the function are provided in the chapter "CUSTOMER
PROGRAMMING / Wash".

13. Cup Warmer (where applicable)

5
1
To set the resistance of the cup-warmer
tray press the button.
2 2
Press the icon .
The machines have a cup tray (5) for stocking the cups.
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on
the tray.
Thoroughly drain the cups before placing them on the tray.
Note. The heating of the cup-warmer tray (5) is deactivated
during the automatic switch-off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine
automatically switches on.
By activating the ECONOMY, mode the cup-warmer is
automatically set to Level 1.
2
Press the icon .
3 3
WATER CHANGE
The following message will be
displayed: "WATER CHANGE". The
water from the boiler will drain from the
hot water nozzle (60 - 70% ca. of the
total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
boiler will be refilled with fresch water
CAUTION: do not cover the cup warmer tray
with any type of cloth.
3
Press the desired key to modify the cup
heater tray power and the icon
return to the previous menu.
to