Programming Measures Function - Faema E71 E Utilisation Et Installation

COFFEE
1
Press the icon .
4
When one of the coffee keys is pressed (e.g. the
following parameters are displayed on the services display:
ater dose
The key in question will remain highlighted on the unit
display.
5
6
TEST. By pressing the
and the following screen appears on the services display:

Programming measures function

2
Press one of the coffee keys (ex.
Group 3).
pre-infusion time saturation time.
All the parameters can be adjusted by the user:
water dose (using the keys
pre-infusion time (using the keys
saturation time (by pressing the
into
Press the
Press the
NOTE EXAMPLE
key, the dispensing starts
NOTE. THE
press the
key), the
Press the
The other functions of the
in both configurations
allowing the time to be adjusted with the keys
icon to exit the settings menu).
icon to confirm the information entered
: shows the duration in seconds of the
pre-infusion phase.
shows the duration in seconds of the
saturation phase.
The parameters displayed are:
Dv: Volumetric meter incremental counter
tG: dispensing time
TB: instant coffee boiler temperature
RB: % activation coffee boiler
P: service
Rc: service boiler resistance
SL: service boiler water level
Evc: service boiler load solenoid valve
21 EN
3
The icons of the programmable keys
are shown on the services display.
key can also be programmed as DOSED:
icon on the parameter display screen:
icon to return to CONTINUOUS mode.
key will remain unchanged
icon, this will turn
resistance
boiler pressure
.