Filter-Holders - Faema E71 E Utilisation Et Installation

CHANGING THE WATER IN THE BOILER - Procedure to carry out at least once a day
1
Press the icon .

FILTER-HOLDERS -

1
In a suitable container that is
neither aluminium or iron, pour
a litre of hot water (50÷80°C)
and a quantity of detergent
according to the product
instructions.
4
Remove any residue with a sponge and rinse well with
running cold water.
2
Press the icon
is operation must e made on all t e filter olders at t e end of ea
2
Remove the filters from the filter holders
.
5
A
lace the filters back in the filter holder, making sure that
the anchoring spring (A of the filter is in its slot
31 EN
3
WATER CHANGE
The following message will be
displayed: "WATER CHANGE". The
water from the boiler will drain from
the hot-water nozzle (60 - 70% ca. of
the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
boiler will be refilled with fresh water
or ing da
3
oak the filters and the filter
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.