Service And Repair Contact; Technical Documentation; Risk Assessment; Accessories/Parts For The Product - Hürner HWT 400-M Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
who were specifically trained and authorized by us. Thus, constantly
high standards of operation quality and safety are maintained.
Non-compliance with this provision will dispense the manu-
facturer from any warranty and liability claims for the product
and any consequential damage.
Important
8

Service and Repair Contact

Hürner Schweisstechnik
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Web: www.huerner.de
We reserve the right to change technical specifications of
the product without prior notice.
Info
Pursuant to the directive 2012/19/EU on Waste Electrical and Elec-
tronic Equipment (so-called WEEE Directive), equipment that was
manufactured or distributed by ourselves may be returned to us. To
discuss the exact procedure we will follow, please contact us with the
details above.
We also declare that the equipment we manufacture conforms to the
directive 2011/65/EU on the restriction of the use of certain hazard-
ous substances in electrical and electronic equipment (so-called RoHS
Directive).
8.1

Technical Documentation

Wiring diagrams, computer-assisted designs and further technical
literatures, as complements or more in depth, will be gladly provided
by HÜRNER Schweisstechnik upon request at the address given above.
8.2

Risk Assessment

A risk assessment under the provisions of the so-called machinery
directive 2006/42/EC was conducted for the machine by a qualified
person entitled to the performance of such an assessment.
10

Accessories/Parts for the Product

Master Clamps for Crosspieces 90 deg. O.D. 315
Reducer Inserts for Crosspieces 90 deg.
Master Clamps f/ Y Branch-offs 45/60 deg. O.D. 315 200-260-407
Reducer inserts for Y Branch-offs 45/60 deg.
Special Reducer for Short Radius 90 mm 22.5 deg.
Special Reducer for Short Radius 90 mm 30 deg.
Special Reducer for Short Radius 110 mm 22.5 deg. 400-148-000
Special Reducer for Short Radius 110 mm 30 deg.
Welding Neck Support O.D. 90 - 315
Additional, Supporting Cylinder for Clamp
Support Stand for Pipes
Replacement Blade for Facing Tool
Only genuine spare parts are acceptable. The use of non-
genuine parts voids any and all liability and warranty on the
part of the manufacturer.
Info
Version January 2020
Tel.: +49 (0)6401 9127 0
Fax: +49 (0)6401 9127 39
E-mail: info@huerner.de
200-260-405
200-260-406
200-260-408
400-146-000
400-147-000
400-149-000
200-604-315
200-260-410
400-155-000
315-109-026
HÜRNER HWT 400–M User's Manual
23
EN