Using The Brakes - CAMPAGNOLO RECORD Mode D'emploi

WARNING!

USING THE BRAKES

• When the brakes are first installed on the bicycle, practice using
the brakes in a clear, traffic-free area. It is important to understand
how the braking system works, operates and "feels" before riding in
public.
• Before every ride, check your brake pads and cables to be sure
they are in good condition. In addition, test your brakes in the begin-
ning of your ride to make sure they are operating properly.
• When riding in wet conditions, remember that the stopping power
of your brakes is greatly reduced and the adherence of the tires to
the ground is considerably reduced. This makes it harder to control
and stop your bicycle. Extra care is required when riding your bicycle
in wet conditions to avoid an accident. An accident could result in
severe personal injury or death.
18
1. TOOLS
All frame assembly, brake adjustment and maintenance operations
can be performed with the tools indicated in Fig.1 (not included in the
package):
1
5 mm Allen wrench
Torque wrench
2. ASSEMBLY
• Fit the brake on the frame or the
fork and tighten the socket-head
nut (A - Fig. 2) using a 5 mm Allen
wrench.
ENGLISH ENGLISH
2 mm Allen wrench
15 mm open end wrench
Torx T25
2
A
19