Fitting The Wheel On The Frame; Front Wheel - CAMPAGNOLO ZONDA Manuel De L'utilisateur

WARNING!
Never exceed the maximum pressure recommended by the tyre manufacturer.
Excessive tire pressure reduces the grip of the tire on the road and increases the risk that the tire will unexpectedly burst.
Inflation pressure that is too low reduces tire performance and increases the probability of sudden and unexpected loss of tire pressure. In addition, prema-
ture wear and damage to the rim may occur.
Incorrect tire pressure could cause tire failure or loss of control of the bicycle, resulting in an accident, personal injury or death.

3 - FITTING THE WHEEL ON THE FRAME

These wheels are compatible with different axle locking systems.

FRONT WHEEL:

• If the FRONT wheel is predisposed for "Quick Release" mounting follow the "Quick Release" instructions which came with the wheel.
• If the FRONT wheel is predisposed for HH12 through-axle mounting follow the mounting instructions provided by the bicycle or fork manufacturer
REAR WHEEL:
• If the REAR wheel is predisposed for "Quick Release" mounting follow the "Quick Release" instructions which came with the wheel.
• If the REAR wheel is predisposed for HH12 through-axle mounting for 135 mm / 142 mm width follow the mounting instructions provided by the frame or
bicycle manufacturer.
5