Temperature; Standby Time - Rotel AROMATICA LUXE 270 Mode D'emploi

• The
• Press the selection knob (4) until the symbols for the desired level blink.
• Press the service button (7) ca. 4 sec. to confirm.
• Programming is completed and the system is in standby mode again.

4.3 Temperature

You can change the desired temperature of the brewed coffee:
Normal
High
Maximum =
The factory setting is High.
• Using the on/off button (2), switch your coffee machine OFF (standby mode).
• Press the service button (7) for about 4 sec. to enter program mode.
• The
• Wait until the
• The
• Press the selection knob (4) until the symbols for the desired selection blink.
• Press the service button (7) ca. 4 sec. to confirm.
• Programming is completed and the system is in standby mode again.

4.4 Standby time

This function allows you to programm when the coffee machine should go to standby
mode after the last use. The following settings are possible:
– Never
– 30 min =
– 2 hrs.
– 5 hrs.
The factory setting is 5 hrs.
• Using the on/off button (2), switch your coffee machine OFF (standby mode).
• Press the service button (7) for about 4 sec. to enter program mode.
• The
• Wait until the
• The
• Press the selection knob (4) until the symbols for the desired selection blink.
• Press the service button (7) ca. 4 sec. to confirm.
• Programming is completed and the system is in standby mode again.
symbols begin to blink.
=
=
symbols light up one after another.
symbol for Temperature lights up and press the selection knob (4).
symbols begin to blink.
=
=
=
symbols light up one after another.
symbol for Standby time lights up and press the selection knob (4).
symbols begin to blink.
29