Electric Connections - Rizzoli STP SF Série Manuel D'utilisation

WARNING! Aspiring hoods or extracting air fans in the room may generate problems
to the device if there is not a suited air intake or in case of air intake sub-dimensioned.
63 179
79
274
399
Picture 13 – Position of the rear hole for the
passage of the air intake conduct. The
dimensions are also valid for STP SF.
Dimensions in mm.
2.12

ELECTRIC CONNECTIONS

The electric connection of the thermal cookers
feeds the electronic control unit, the circulation
pump and, for STP model, the oven lamp. The con-
nection to AC power must be done by experienced
1
Picture 15 – Electric connection of the thermal cooker. 1) Plug for control unit and pump (STP SF) 2) Terminal
board (STP)
136
63 179
79
274
399
STP SF
2
111
230
63
215 50
136
Picture 14 – Position of the lower hole for the
passage of the air intake conduct. The
dimensions are also valid for STP SF.
Dimensions in mm.
people and according with existing laws. The in-
staller is responsible of the correct connection ac-
cording with safety rules.
On STP SF model, in correspondence of the vain
230
63
215 50
STP