Rizzoli STP SF Série Manuel D'utilisation page 116

79
399
Picture 18 – Position of the lower hole for the passage of the pipes.
3.3 CONNECTIONS TO THE HEATING SYSTEM
Before making the connections, we suggest to re-
move completely the door, in order to make the
access to the vain better (see picture 19). Before
starting the thermal cooker you must make all the
connections to the heating system and you must
fill the tank inside the thermal cooker. Using the
cooker with empty or not connected boiler would
Picture 19 – Detail of the vain door pivots.
172
69
cause the irreversible damage of the boiler itself.
It is always necessary to connect to the system
the going and return connectors of the heating
system and the connector of the safety discharge
of the tank inside the thermal cooker. For the con-
nection, it is recommended to use flexible pipes,
which can be placed both on the floor or on the
114