Publicité
Les langues disponibles
Les langues disponibles
1.6
ACCESSORIES
Together with the wood fired thermal cookers you
will find some accessories that simplify the instal-
• Ash drawer
• Glove
• Poker
• Scraper
• Adjustable crank for grill raiser
• Oil for the care of the plate
• Cleaning oil for the plate
• Abrasive sponge
• Sponge for glass cleaning
2
INSTALLATION
2.1
GENERAL NOTES
The thermal cooker must be installed by experi-
enced people according to the specific technical
laws. In particular it is important to pay attention
to the connection to an appropriate heating sys-
tem and to the chimney, which must be suited and
dimensioned according to the device.
Also the connection to AC power must be done in
order to power up the control unit, the circulation
pump and to make the oven light working when
it is available. When placing the thermal cook-
er, you must pay attention to prevent damages.
Do not drag the thermal cooker, move it keeping
it lifted from the floor. The thermal cooker must
not be moved making effort on the handrail or on
the handles. In case of furniture near the thermal
cooker, be sure to maintain the minimal safety dis-
tances in case of inflammable materials or sensible
to high temperatures (see paragraph 9.4). If neces-
sary, Rizzoli produces spacers for thermal cookers
framed into furniture. The device must be installed
on a floor with adequate load capacity. If the ex-
isting building does not satisfy this requirement,
further actions shall be considered (for example
using a plate do distribute the load). In case of
floor made of inflammable materials it is necessary
Safety distances from inflammable or sensible to heat materials in absence of other isolating systems.
Model
STP SF
STP
lation, the maintenance and the daily use of the
device.
• Devices for the connection to the chimney, va-
• Grill for the oven (STP)
• Baking-pan (STP)
• Baking-pan holder (STP)
• Glove box (STP)
• Instruction and maintenance booklet
• Green booklet and warranty certificate of the
to put a fire-proof protection on the floor in front
of the fire door. The protection must extend for a
minimum of 50 cm in front and for a minimum of
30 cm sideways over the fire door.
In case of thermal cookers to be enclosed near not
heat sensible materials, it is necessary to maintain
a minimum distance of 1-2 mm to allow the ex-
pansion of the materials when the temperature
changes.
It is not recommended to mount cabinets upon the
thermal cooker. If this happens, it must be guar-
anteed the resistance of the cabinet to the heat
produced by the thermal cooker: in this case, a
minimum distance of 60 cm from the plate must be
respected. In case of aspiring hood upon the ther-
mal cooker, it is mainly important that the hood
can suffer high temperatures. Rizzoli is specialized
in the production of hoods to be used with thermal
cookers.
During the installation, be sure to not obstruct
the ventilation holes on the frame: the occlusion
of these holes would cause a loss of the isolation
capacities of the thermal cooker and in general of
its correct working.
Laterally
Behind
25 cm
25 cm
20 cm
20 cm
104
riable depending on the model of thermal cooker
wood fired thermal cooker
From
80 cm
80 cm
On
60 cm
60 cm
Publicité
Chapitres
