Table des Matières
Publicité
EN
E
•
For SIDE-mounted sliding tubes, insert the mounting parts
for the S411.S prior to mounting the sliding tubes to the
vehicle chassis [See Fig. 7.4].
•
For the other types of sliding tubes, the parts can be
mounted at any stage.
E
§7.3 - Routing of the electric cables
•
Most slider HTL are equipped with a protective PVC con-
duit from the hydraulic power pack to the control box, con-
taining the electric wiring of the HTL.
•
Fit the mounting brackets for this conduit to the sliding
tubes, adjust their position, and assure the conduit is rout-
ed in a sound and healthy loop.
•
Verify the routing while executing all HTL func-
tions, and assure the conduit cannot be
stretched, squeezed, caught or damaged by
any obstruction on the HTL frame, the sliding
tubes, the vehicle chassis and its accessories
[See Fig. 7.5].
DHOLLANDIA
7.4
!
7.5
EX.
69
Publicité
Table des Matières
