Table des Matières
Publicité
EN
M
•
SIDE-mounting + option S255: fit the platform buffers
S255 now, together with the mounting brackets of the
sliding tubes to the chassis of the vehicle. This will avoid
double work at a later stage [See Fig. 5.22].
•
For all HTL ≥ 2500 kg, reinforce the bolted con-
nections by means of 10mm weld to the vehicle
sub frame (truck chassis), or to the bottom
flange of the I-beam (trailer chassis) [See Fig.
5.23].
•
Consult the FITTING AND BODY BUILDING
INSTRUCTIONS of the vehicle manufacturer to
verify what is allowed.
F
M
•
The torque fastenings of all bolts should be
checked after completion of the compulsory
static and dynamic weight tests at the end of
the fitting process, and retightened if required.
•
Ensure that all freshly made chassis perfora-
tions are properly deburred, and that all metal
work (cutting, drilling, welding, grinding...) is
properly treated with an anti-corrosive protec-
tion (e.g. Zinc-spray or Dinitrol). Allow to dry.
Consult the FITTING AND BODY BUILDING
INSTRUCTIONS of the vehicle manufacturer
to take into account their instructions.
DHOLLANDIA
5.22
!
5.23
45
!
Publicité
Table des Matières
