Rizzoli S Manuel D'utilisation page 88

sides. To make this operation, you need a
star screwdriver and the hex key with the
screws given together with the wood fired
cooker. First, you must remove the final
part, which is just inserted by pressure. Then
you have to release the hex head screws
under the carrying of the handrail where
necessary. Now you can extract the handrail
bar from the carryings, then unthread the
Pictures 16 and 17- Modification of the handrail
pommels of the carryings and the bend of
the handrail.
Now you must insert the final part where
was inserted the bend before, then remove
the carryings with the star screwdriver, re-
place the fixing screws with the screws giv-
en as endowment and finally close again the
hex head screws released before.
40 mm
30 mm
86