Setting Function "Day/Night - Sygonix 700 TVL Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

k) Setting function "DAY/NIGHT"
In the default setting, the camera switches automatically between colour and black-and-white
display, depending on the ambient brightness.
"AUTO"
"COLOUR"
"B/W"
30
The home technology brand for the entire house. More information at www.sygonix.com
The camera switches automatically between colour and black-and-white
display, depending on the ambient brightness.
Press the button to display a submenu:
"BURST": If the setting "ON" is selected, the colour subcarrier signal is activa-
ted during black-and-white display. This means that, for example, the menu
options in the setup menu are displayed in colour on the monitor even in the
black-and-white mode.
Further, for colour monitors, the image quality can also be improved when
displaying the black-and-white image.
"DELAY CNT": Delay value for the switch
"DAY->NIGHT": The brightness value at which the camera switches from
colour mode to black-and-white mode
"NIGHT->DAY": the brightness value at which the camera switches from black-
and-white mode to colour mode
Colour display: Not active with this camera, because the integrated bright-
ness sensor switches the camera automatically and activates the IR lighting.
Black/white setting
"BURST": If the setting "ON" is selected, the colour subcarrier signal is activa-
ted during black-and-white display. This means that, for example, the menu
options in the setup menu are displayed in colour on the monitor even in the
black-and-white mode.
Further, for colour monitors, the image quality can also be improved when
displaying the black-and-white image.

Publicité

Table des Matières
loading

Table des Matières