Setting Function "Day/Night - Sygonix 680 TVL Mode D'emploi

k) Setting function "DAY/NIGHT"
In the default setting, the camera switches automatically between colour and black-and-white
display, depending on the ambient brightness.
"AUTO" The camera switches automatically between colour and black-and-white dis-
play, depending on the ambient brightness.
Press the button to display a submenu:
„BURST": If the setting „ON" is selected, the colour subcarrier signal is ac-
tivated during black-and-white display. This means that, for example, the
menu points in the setup menu are shown in colour on the monitor even in
black-and-white mode.
Also, for colour monitors, the image quality can also be improved during the
display of the black-and-white image.
"DELAY CNT": Delay value for the switch
„DAY->NIGHT" Brightness value at which the camera switches from colour
mode to black-and-white mode
„NIGHT->DAY": Brightness value at which the camera switches from black-
and-white mode to colour mode
"COLOR" Colour display: Not functional with this camera, since the integrated bright-
ness sensor switches the camera automatically and activates the IR lighting.
"B/W" Black/white setting
„BURST": If the setting „ON" is selected, the colour subcarrier signal is ac-
tivated during black-and-white display. This means that, for example, the
menu points in the setup menu are shown in colour on the monitor even in
black-and-white mode.
Also, for colour monitors, the image quality can also be improved during the
display of the black-and-white image.
All manuals and user guides at all-guides.com
33