Setting Function "Privacy; Setting Function "Day/Night - Sygonix 20815Q Mode D'emploi

j) Setting Function "PRIVACY"
You can cover up to 8 image areas with a rectangle (8 different colours can be selected), so that
they are invisible.
This is done to protect sensitive areas from monitoring or recording, e.g. the workplace of an em-
ployee or the display on a screen.
First switch on the function. If you push the button only briefl y as usual, you can perform the fol-
lowing settings:
"AREA SEL" Select one of the 8 image areas (1/8......8/8).
The sliders „TOP", „BOTTOM", „LEFT" and „RIGHT" can be used to draw a rec-
tangle.
"COLOR" Set the colour of the rectangle; 8 different colours are available. Observe that
the colours are displayed as grey tones in black/white display of the camera
image (e.g. at night)!
"TRANSP" Set the rectangle transparency here. The rectangle is not transparent at a
setting of „1.00".
"MOSAIC" If „TRANSP" is set to a value below „1.00", the image may also be displayed
falsifi edly if you select „ON".
The image area selected for „AREA SEL" is applied with a mosaic pattern. This
still shows when something moves in the image area, but no details are vis-
ible.
k) Setting Function "DAY/NIGHT"
The camera switches automatically between colour and black/white depending on ambience
brightness.
"AUTO" The camera switches automatically between colour and black/white depend-
ing on ambience brightness in the basic setting.
Press the button „MENU" to show a submenu:
„BURST": The setting „ON" activates the colour carrier signal in black/white
display. This means that, e.g., the menu items are displayed in colour the
setup menu even in black/white display.
The image quality may improve by using black/white on colour screens.
"DELAY CNT": Delay value for switching
„DAY->NIGHT": Brightness value as of which the switch from colour to black/
white mode is performed
„NIGHT->DAY": Brightness value as of which the switch from black/white to
colour mode is performed
29