Call/Leave The Setup Menu, Save Settings; Select Menu Items/Function/Settings - Sygonix 12133D1 Notice D'emploi

b) Call/Leave the Setup Menu, Save Settings
Briefly push the control lever to call the setup menu. The setup menu is
displayed in the screen image; see figure on the right.
To save all settings, select "SAVE" and then briefly push the control
lever.
To leave the setup menu, select "EXIT" and then briefly push the control
lever. The setup menu display will then disappear from the screen.
After leaving the setup menu without saving the settings with "SAVE", they will be lost if the power supply is
disconnected or a power outage occurs!
Therefore, do not forget to select "SAVE" first before leaving the setup menu and confirm by briefly pushing
the control lever. Then all settings made are retained when the power fails. Then you can leave the setup
menu via "EXIT".
c) Select Menu Items/Function/Settings
• By moving the control lever up, down, to the left or right briefly, you
can select the individual menu items, functions or settings.
• To confirm a selection, briefly push the control lever (as if it was a
normal button).
• The menu item "NEXT" can be used to switch to the next page;
"BACK" returns you to the previous page; see figures on the right.
35