Steba SV 75 Mode D'emploi page 20

into the water bath immediately after filling, and can remain in the water for well
beyond the specified minimum times without the required core temperature rising
above the temperature setting due to the sous-vide method.
Steba tip
If you insert several vacuum bags with different cooking times and qualities of meat,
you should mark them previously. At 62°C you can leave the meat in the pot and re-
move any if necessary, without any change of the consistency of the meat.
Further processing
Preservation: Cool meat in ice water immediately after cooking.
It can then be stored in the fridge for several days (fridge temperature of 7°C = 5
days, fridge temperature of 5°C = 10 days) without loss of quality or frozen in the
freezer compartment.
To thaw, place the vacuum-packed food in the device at approx. 55°C and thaw it out
in the bag. Then remove from bag, eat immediately or briefly
sear.
Eating immediately: Of course, the meat can also be eaten immediately after Sous-
Vide cooking, or seared on each side for no more than 1 minute in an extremely
hot frying pan with a little sunflower oil. The shorter the frying time, the juicier the
meat. The meat can also be brushed with oil and scorched with a butane gas burner.
Allow meat to relax for approx. 2 minute before cutting.
Backwards cooking: If the raw meat is briefly fried, seasoned and vacuum packed,
it is ready for eating after SousVide cooking.
You can also prepare a seasoned red wine / balsamic vinegar stock, add it to the
meat, vacuum pack and cook using SousVide.
Troubleshooting
Dear Client,
Thank you for buying this high-quality STEBA product. The following table will help
you with problems that may occur when using your device. For many problems there
is a simple solution, because not everything that appears like a malfunction must be
serious. Please check the following list before contacting our customer service.
Problem
No light after plug-in of
the device
20
Reason
∙ No power
∙ To many devices at one
power cord
Solution
∙ Check is plug is plugged-
in correctly
∙ Check the fuse