Contraindications - Dentsply Sirona Lucitone Digital Print Mode D'emploi

Contraindications

Lucitone Digital Print Denture components are contraindicated for patients with known
hypersensitivity or severe allergic reactions to any of the components.
Warnings
1. Lucitone Digital Print Denture materials contain components which may cause skin dryness
or irritation, sensitization (allergic contact dermatitis) or other allergic reactions in
susceptible persons. Wear protective gloves, eye protection and protective clothing when
handling.
Skin Contact: Wash thoroughly with soap and water. If skin sensitization occurs, discontinue
use. If dermatitis or other symptoms persist, seek medical assistance.
Eye Contact: Flush eyes promptly with copious amounts of water for 15 minutes and consult
a physician. Wash skin with soap and water.
2. Lucitone Digital Fuse Step 1 - 3D Tooth Conditioning Agent - liquid is highly lammable.
Keep container tightly closed and use/store away from sources of ignition. Allergic contact
dermatitis and other allergic reaction may occur in susceptible individuals. Product may
cause skin dryness, sensitization or other allergic reactions.
3. Lucitone Digital Fuse Step 3 - 3D Denture Sealer (liquid/vapor) is highly lammable. Keep
containers tightly closed and use/store away from heat or sources of ignition. Suspected of
damaging fertility or the unborn child. Harmful to aquatic life with long lasting efects. Avoid
release into the environment. Dispose contents.
4. Lucitone Digital Print Denture materials - Avoid inhalation or ingestion. High vapor
concentration might induce headache, nausea and irritation of eyes and respiratory system.
Work in a well-ventilated area. Avoid contact with eyes. Wear eye protection. Excessive
long-term exposure may be associated with other more serious health efect.
Inhalation: Move subject to fresh air. Give oxygen or artiicial respiration as required.
Ingestion: Contact your regional Poison Control Center immediately.
5. Proper ventilation and personal protective equipment should be used when grinding
devices as the particulate generated during grinding may cause respiratory, skin and/or eye
irritation.
6. Isopropyl Alcohol is highly lammable. Keep containers tightly closed and use/store away
from sources of ignition.
Precautions
1. These products are intended to be used only as speciically outlined in the Instructions for
Use (IFU). Any use of these products inconsistent with the IFU is at the discretion and sole
responsibility of the practitioner.
2. Store resins and system components at room temperature 60°F - 80°F (16°C – 27°C) and
avoid direct sunlight. Keep container closed when it is not in use. Product shall not be used
after expiration date. Dispose of contents and containers in accordance with local and
national regulations.
3. Lucitone Digital Print™ 3D Denture Resin, Lucitone Digital Print™ 3D Trial Placement Resin,
and Lucitone Digital Fuse™ Step 2 - 3D Denture Bonding Resin:
When washing a 3D printed appliance with a solvent or polishing the appliance, it should be
done in a properly ventilated environment with proper protective masks and gloves. Expired
or unused resins shall be disposed in accordance with local regulations.
4. Lucitone Digital Fuse™ Step 1 – 3D Tooth Conditioning Agent:
Use in a ventilated workspace. Handle teeth with solvent-resistant gloves or tweezers.
Product is light sensitive. Minimize exposure to light and keep the lid on the container to
maintain its efective use. Product is very volatile and lammable. Keep away from heat,
sparks and lame. Do not add Lucitone Digital Fuse™ Step 1 to a warm metal container or
2