Indications For Use - Dentsply Sirona Lucitone Digital Print Mode D'emploi

Indications for Use

Lucitone Digital Print™ 3D Denture Resin is a light-cured resin indicated for the fabrication of
denture bases in dental laboratories, including full dentures, and implant overdentures.
Lucitone Digital Try-In™ 3D Trial Placement Resin is used as a try-in material for evaluation prior to
fabrication of the inal restoration.
• Fabrication of these prostheses require a computer-aided design and manufacturing (CAD/
CAM) system using an additive printer.
Lucitone Digital Fuse™ Step 1 – 3D Tooth Conditioning Agent is indicated for use in enhancing the
bond of denture teeth to denture base.
Lucitone Digital Fuse™ Step 2 – 3D Denture Bonding Resin is utilized as an aid in bonding denture
base to denture teeth as well as repair using traditional techniques.
Lucitone Digital Fuse™ Step 3 – 3D Denture Sealer is a light-cured sealant that produces a
smooth, glossy surface inish on the denture.
Requirements for Denture Fabrication
> File in STL Format
> Lucitone Digital Print™ 3D Denture Resin
> Lucitone Digital Try-In™ 3D Trial Placement Resin
> IPN 3D™ Digital Denture Teeth
> Lucitone Digital Fuse™ Step 1 – 3D Tooth Conditioning Agent
> Lucitone Digital Fuse™ Step 2 – 3D Denture Bonding Resin
> Lucitone Digital Fuse™ Step 3 – 3D Denture Sealer
> Ultrasonication Bath or Orbital Shaker
> Isopropyl Alcohol (≥ 99%)
> UV Tack-Cure Light
> inLab Speedcure™ Processing Unit
> Electric Hot Plate
> Metal Container Kit
> Flocked Applicator Tips
> Biobond Brush, #4 Flat
> 4x4 Gauze Pads
> Pipette
> Small Plastic Container (see Figure 5)
> Carbon® 3D M-Series Printer Software
> Carbon® 3D M-Series Printer
CAUTION: Any unauthorized changes to the process, worklow, materials, equipment,
parameters, or software may result in a device that is out of speciication and is not
recommended. Contact Dentsply Sirona for a list of compatible components.
1
en