Ecolab Versatronic Manuel D'utilisation page 509

Fig. 139: Date and time
(1) The "Read out permanently" button starts the
continuous synchronisation of the date/time display in
the software with the device.
(2) The "Stop" button stops the constant synchronization of
the date/time display in the software with the device.
(3) The "Synchronize" button synchronises the device time
with the time set in the PC Setup program. The time
used by the instrument is adapted to the set time, if the
difference is not more than 30s. This function is
primarily used to synchronise the PC time with the
device time.
12.9.2 Screenshot
The current display on the device can be transmitted using this function on the PC.
Screenshots can be printed or stored on the PC in popular image formats such as Bitmap,
Tiff, JPEG, etc. Call: On-line parameters è screenshot (double-click)
Fig. 140: Screenshot
12.9.3 Ethernet
This menu item in the online parameters allows the configuration of the Ethernet interface
of the PC setup program. Go to settings: On-line Parameters è Ethernet (double-click)
The Ethernet settings are explained in the configuration.
Ä Chapter 10.4.13 'Ethernet' on page 177.
See
(4) The "Set" button sets the clock in the device according
to the setting in the PC setup program.
(5) Time Settings. You can select between using the PC
time or entering a time. By using the "Synchronize"
button or "Set" button, the correspondingly set time is
set in the device.
237
PC setup program
417102269 Rev. 2-08.2020