Menu Structure - Ecolab Versatronic Manuel D'utilisation

Use
User rights
Parameterisation / display parameters
Function level / Show data
Device info / display data
Calibrate touchscreen
Registration / Show registration image
Event list / Show event list
Use
Acknowledge alarms
Controller image / Set nominal values,
Switch to manual mode
Controller configuration / Self-optimisation
Carry out calibration
User level / Change parameters
Configuration / change parameters
Parameterization / change nominal value
Parameterization / controller parameters,
Change date / time
Function level / Simulate outputs
Service / Default configuration
Registration / Evaluate measurement data history
Memory manager / Change device configuration,
Export service data, Update software
Enable extra codes
9.1.2

Menu structure

At User level you can use 3 different navigation buttons (see
on page 85, fig. , pos. (4), (5), (7)) to get to the device option screens.
The menu levels "Device Menu" and "Alarm / event list" (see ,
on page 85, fig. , pos. (2), (3)) are also opened with these buttons. The device menu
contains submenus for setting, maintenance and diagnostics of the device and its
functions.
The memory manager is called automatically when a USB flash drive is plugged into the
USB host interface. This is used to exchange data between the device and the inserted
memory stick.
417102269 Rev. 2-08.2020
User level
X
X
X
X
X
Ä Chapter 9.1.3 'Controls'
82
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X
X X X
X X X
X
X X X
X X
X
X
X X X
X
X
Ä Chapter 9.1.3 'Controls'