Ecolab Versatronic Manuel D'utilisation page 473

Fig. 102: Device connection list
Connection settings assistant
The function "Use connection settings assistant" helps the user create a new entry, a new
connection, and edit existing entries. The assistant is always active after opening the
device connection list (set check mark). It opens each time you want to add a new entry to
the device connection list.
Ä Chapter 12.7.2 'Configuring the connection with assistant' on page 202.
See
The wizard can be disabled by setting the hook to be removed. Now, once a new entry for
the device connection list is added, the users must choose each step of the configuration
themselves. After reopening the device connection list, the assistant is active again.
See Ä Chapter 12.7.3 'Configuring the connection without the assistant' on page 206.
Connecting
If the users want to connect (or start the data transfer in the absence of connection), the
PC setup program opens the device connection list. The users must then select the
device connection list, and then the "Connect" button, for the device in question to
operate. If a device is not to be connected, close the respective dialogue (window "device
connection list") with the button "Exit" or by clicking on the cross in the upper right corner
of the dialogue box.
Toolbar
The toolbar of the device connection list gives the user different options.
Fig. 103: Toolbar
Explanation
New entry
Creates a new connection entry
Edit properties
Opens a connection settings dialogue
Remove entry permanently
Deletes a connection entry
Connect
Connects to the selected device in the list
Exit
Closes the device connection
201
PC setup program
Button
417102269 Rev. 2-08.2020