Ecolab Versatronic Manuel D'utilisation page 377

Alternatively, the web server can be configured and enabled for online
visualisation. With an active Web server, the website is displayed by the
Web server instead of the online visualisation in a web browser.
The website is opened just like the online visualisation by entering the IP
address or URL of the device. Up to five clients can access simultaneously.
To open the website you need the web server password.
How the visualisation of the web server is used depends on the individual
set up of the website stored on the device.
Ä Chapter 12.8.12 'Web server' on page 235.
See
The online visualisation is called up in a Web browser. Simply enter either the IP address
or URL of the Ecolab 'Versatronic' in the address bar of your Web browser.
Ä Chapter 10.4.13 'Ethernet' on page 177.
See
On the opened site you can choose between "visualisation" and "Quad View".
The visualisation shows a display view, similar to that of the device. First, a password is
required. Here you have to enter the web server password that is specified in the Web
server configuration. See
Now you can select a user image, as you can on the device.
Section "Control ring user images", page 78
Access to the device menu stays blocked. Pressing the "Device Menu" button just shows
calibration log books. See
Fig. 49: Visualisation
With Quad-View, you can open four different and independent views of the device.
On the open quad-view, four plus signs appear for this purpose. Click on one, then you
are prompted to enter the IP address of Ecolab 'Versatronic' . After entering the IP
address, the screen opens and you can use it just like the "Visualisation" screen.
By clicking on the minus sign in the top left on one of the four views, the Quad View is
reset.
Ä Chapter 12.8.12 'Web server' on page 235.
Ä Chapter 10.2.1.2 'Calibration logbook' on page 112.
105
Use
417102269 Rev. 2-08.2020