Configuration - Ecolab Versatronic Manuel D'utilisation

Masquer les pouces Voir aussi pour Versatronic:

Table des Matières

Les langues disponibles

Configuration

Changes in the settings in the "Configuration" menu are only possible when

a user is logged on with the appropriate user rights.

With this device, "operator" and "Master" are given no user rights for the

configuration to the user levels. The sub-items in the configuration can

therefore being viewed but not be changed.

After each configuration change, the device restarts functions affected by

the changes. Analogue and digital outputs can accept unwanted conditions

during startup.

This means you can never make changes to settings while a machine is

Apart from faulty installation, incorrect settings on the instrument may also

affect the subsequent process in its proper function or cause damage.

You should therefore always provide generic safety equipment and only let

qualified personnel make changes to settings.

When making changes to configuration data for the data monitoring and

recording, recorder data is closed and a new recording section started.

Ä Chapter 9.1.1 'Passwords and user rights' on page 81.

417102269 Rev. 2-08.2020