Ecolab Versatronic Manuel D'utilisation page 376

Use
Fig. 48: History function
(1) Title bar including specification of memory cycle time
(2) "Exit" button to leave the histories View
(3) "Zoom" button to compress the time range in the frame
9.6 Online visualisation
Using a Web browser, all operating screens of the control ring, the alarm / event list,
measured data history recording function and the calibration log book can be accessed
and assessed via online visualisation. The prerequisite for this is that it must be set as an
online visualisation in the basic settings, the "standard online visualisation".
Ä Chapter 10.4.2 'Basic settings' on page 150.
See
To view the online visualisation, a PC running a Microsoft Windows operating system and
Silverlight® is required.
Operating actions of the device functions (e.g. setpoint input or operation of a controller by
hand) are not in the web browser possible and must be made directly on the device.
You can make device settings only on the device or in the Ecolab PC Setup program.
The "Device Menu" button opens the calibration log in the online visualisation.
You can look up the measurement data history with the recording option.
For more information on the above screens, see:
Ä Chapter 10.2 'Select calibration' on page 111
Ä Chapter 10.3 'User level' on page 138
Ä Chapter 10.4 'Configuration' on page 145
Ä Chapter 10.5 'Parameter setting' on page 178
The online visualisation can be accessed by up to five clients simultaneously.
417102269 Rev. 2-08.2020
(4) Buttons "scrolling" for forward and backward scrolling
in the history
(5) Cursor
104