1. O-rings
1. Joints toriques
1. Juntas tóricas
Lubricating the drive chain
The drive chain must be cleaned and lubricated
at the intervals specified in the periodic mainte-
nance and lubrication chart, otherwise it will
quickly wear out, especially when riding in dusty
or wet areas. Service the drive chain as follows.
CAUTION:
The drive chain must be lubricated after wash-
ing the ATV or riding in the rain.
1. Clean the drive chain with kerosene and a
small soft brush.
CAUTION:
To prevent damaging the O-rings, do not clean
the drive chain with steam cleaners, high-
pressure washers or inappropriate solvents.
8-81
EBU00805