Publicité
1. Throttle stop screw
1. Vis de butée de papillon
1. Tornillo de tope del acelerador
Idle speed adjustment
NOTE:
A diagnostic tachometer must be used for this
procedure.
1. Start the engine and warm it up for a few
minutes
at
2,000 r/min. Occasionally rev the engine
to 4,000 to 5,000 r/min. The engine is
warm when it quickly responds to the
throttle.
2. Connect the tachometer and set the idle to
the specified idling speed by adjusting the
throttle stop screw. Turn the screw in to
increase engine speed, and out to de-
crease engine speed.
Specified idle speed:
1,450 ~ 1,550 r/min
8-53
approximately
1,000
EBU00301
to
Publicité
Chapitres
Dépannage
