Safety Instructions For Maintenance; Possible Malfunctions - Bartscher FW 10 Mode D'emploi

o All parts should be stored together. The screw shaft, knife and one of the plates
should be placed inside the screw housing and secured with the closing ring. Attach
the complete screw housing to the motor housing. This will help in avoiding cuts and
losing parts of the unit. Place the tray on the grinding funnel.
o Store the plates in the integrated tray at the rear of the unit's housing. Store other
accessories (sausage stuffer, kebbe attachment and divider) inside the plunger.
o Store the power cable in the hold at the bottom of the unit.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Malfunction
Plug is in socket
but motor does not
function
The motor
suddenly stopped
while in use
Return motion can
not be activated
Liquid is flowing
from the outlet
Cause
• Safety fuse has been
triggered.
• The power ON/OFF
switch is off.
• The Start/Stop
button has not been
pressed.
• Overheating protection
has been triggered.
• Return motion can only be
activated when the motor
is off and the power ON/
OFF switch is turned on.
• Food products are too
wet or contain too much
water.
Solution
• Check the safety fuse, connect
the unit to another socket.
• Turn the unit on by the power
ON/OFF switch.
• Press Start/Stop
• Activate the unit according to
the instructions in "Protection
against overheating".
• Turn off the motor using the
Start/Stop button, then
press the return motion button
.
• Dry the wet products. Do not
process products containing
too much water.
button.
- 43 -