Bartscher FW 10 Mode D'emploi page 38

Pressing cookies
1. Prepare cookie dough according to your own taste. Leave it in the refrigerator for a
short time prior to processing.
2. Prepare the unit for pressing cookies. Mount the
cookie press attachment according to the following
instructions.
3. First, insert the screw shaft into the housing with
the plastic ring.
4. Attach the divider so that its notch securely fits with
the projection in the screw housing. Attach the
cookie press form to the screw housing and fix it to
the screw housing using the closing ring.
5. Fix the complete screw housing to the motor
housing by turning it counter-clockwise until a
"click" is heard.
6. Place the tray on the grinding funnel of the screw
housing.
7. Insert the cookie press forms into the guide and
select the desired shape.
8. Place the prepared dough on the tray.
9. Connect the unit to a single grounded outlet and turn
on using the power ON/OFF switch. To activate the
unit, press Start/Stop
motor's speed as necessary (press
control panel).
10. Use the plunger to push the dough into the grinding
funnel.
11. Cut off the desired length of formed cookie dough
and arrange it on a baking tray covered in baking
paper.
12. After preparing the cookies, turn the unit off (press
Start/Stop
Remove the unit's plug from its socket.
13. Bake cookies according to your own recipe.
button. Reduce the
button and power ON/OFF switch).
once on the
- 37 -