Bartscher FW 10 Mode D'emploi page 35

Flow speed button
Button functions
Flow speed button
Start/Stop button
Return motion
button
Mincing and mixing
•
Select the perforated plate appropriate for the food product to be processed:
→ large perforations for hard ingredients and thick sausage stuffing;
→ medium perforations for softer ingredients;
→ small perforations for small mincing (e.g. meat pockets//kebbe).
Next, attach the selected plate to the screw shaft (never use more than one plate).
Ensure that the notch in the plate securely fits with the projection in the screw housing.
Screw the closing ring on the screw housing.
- 34 -
Start/Stop button
Use this button to adjust the speed of the motor: 1 x press –
slower motor speed
Use this button to activate/stop processing food products in
the meat grinder
Use this button to free products lodged in case they become
stuck in the screw housing
1. First, place the screw shaft with plastic seal inside
the screw housing. Place the knife on the screw
shaft with the flat surface facing out.
WARNING!
The knife is very sharp, be careful when
assembling it.
Return motion
button