Installation And Operation; Safety Instructions - Bartscher FW 10 Mode D'emploi

①
Closing ring
②
Perforated plates (large, medium, small)
③
Knife
④
Screw shaft
⑤
Screw housing
⑥
Tray
⑦
Integrated tray for perforated plate storage
⑧
Control panel

5. Installation and operation

5.1 Safety instructions

WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
Do not place the power cable on a carpet or other material that retains heat. Do not
cover the power cord. The power cable must not be near the working area and must
not be immersed in any liquids.
•
Do not use the unit if it is malfunctioning, damaged or after it has fallen.
•
Do not use accessories and spare parts not recommended by the manufacturer. They
may pose a danger to the user and others or may damage the unit, and may also
invalidate the warranty.
WARNING! Risk of electric shock!
An improperly installed unit may cause injury!
Prior to installation, compare the parameters of the electrical network with the
technical specifications of the unit (see specification plate).
Only connect the unit when all parameters match! Follow all safety rules!
⑨
Power ON/OFF
⑩
Housing
⑪
Motor
⑫
Release button
⑬
Plunger
⑭
Sausage stuffer
⑮
Kebbe attachment
⑯
Cookie press attachment
- 31 -