Using The Mincer; Dismantling The Mincing Set; Recommendations For Use - Bartscher AB12/T-L Mode D'emploi

Using the mincer

In combined grater-mincer versions, lower the grater lever.
x
Tighten the filler knob in the versions mod.AB12/T-L - TR12/S.
x
Tighten the mincer body-blocking knobs in versions mod.AB12/AT – AB22/AE – TR12/TS – TR12/C –
x
TR22/TE – TR22/C.
Tighten the handwheel on the output mouth of the mincer without blocking.
x
Start-up the machine by pressing start button "I" (in combined models start-up is only possible if the
x
grater lever is lowered).
Place the product inside the upper mincer mouth and press it down using the pestle supplied.
x
At the end of the work session press the stop button "0".
x
At the end of the work cycle remove the mincer set and wash using suitable detergents in hot water or in
x
the dishwasher.
Dismantling the mincer set
Mod.AB12/T-L – TR12/S:
Remove the hopper from the upper mouth.
x
Rotate the handwheel anti-clockwise.
x
Extract:
x
the mincing plate;
-
the blade;
-
and the volute, in sequence
-
Unscrew the filler knob by turning anti-clockwise
x
and extract the mincer filler.
Perform operations
x
reassemble the mincer group.
Mod.AB12/AT - AB22/AE – TR12/TS – TR12/C –
TR22/TE – TR22/C:
Remove the hopper from the upper mouth.
x
Turn the handwheel anti-clockwise.
x
Extract
x
the mincing plate;
-
the blade;
-
and the volute in sequence
-
Unscrew the filler knobs and extract the mincer
x
filler .
Perform operations
x
reassemble mincer group.
INFORMATION: Prior to each work cycle ensure that the removable parts are properly fixed

Recommendations for use

The completely extractable mincing set on the versions AB12/AT-AB22/AE-TR12/TS-TR12/C-TR22/TE-
TR22/C, permits the user to place it in refrigerators and other similar devices, even when it contains residual
product. This feature makes it possible to use the mincer at different times of the day without having to wash
and clean the various components after use, in conformity with hygiene laws currently in force.
Translation of the original instructions
in reverse order to
in reverse order to
to the machine.
OPERATION AND
10
3
CLEANING