Bartscher FW 10 Mode D'emploi page 43

o Press the release button at the front of the unit and disconnect the screw housing from
the motor by turning it clockwise.
o Unscrew the closing ring and remove all elements from the housing (plate, knife, screw
shaft, etc.).
WARNING!
The knife is very sharp, be especially careful when removing it.
o Remove leftover food products from the screw housing and grinding funnel. If
necessary, use a wood or plastic spoon.
Cleaning the unit and accessories
ATTENTION!
Never wash the unit or its parts in a dishwasher.
Do not hard or sharp instruments that may damage or scratch the unit.
When cleaning the unit, never use harsh or scouring cleaning products, as they will
cause discoloration or corrosion of the unit's parts.
o Disassembled parts of the unit should be washed in a warm solution of water and
washing-up liquid. Use a soft sponge or cloth.
o Dried food can be removed easily if left for a time in warm water. Rinse the cleaned
parts in clean water and dry thoroughly.
ATTENTION!
Never immerse the motor housing and power cable in water or other liquids.
o Wipe the housing and power cable with a soft cloth. Ensure that no liquids get inside
the unit's openings. Dry the motor housing thoroughly.
o Leave all cleaned parts out for ½ an hour to dry.
o Wipe the plates and knife with a small amount of cooking oil to prevent rust.
Storing the unit
o If the unit is to remain unused for a longer period, store it in a dry, clean place secure
from frost, sun and children.
o Do not place any heavy objects on the unit.
- 42 -