High Vacuum Flange Connection - Agilent Technologies TPS-mobile 9698400 Notice De Mode D'emploi

17 Technical Information
Turbo Pumping System Connection
The inlet screen is fitted in the upper part of the pump. TPS-mobile is
always provided with inlet screen fitted on. Agilent suggest not to
remove the TMP inlet screen, to avoid accidents involving the
pumping system tool and/or pumping system users.

High Vacuum Flange Connection

To connect the Turbo pump to the ISO inlet flange, remove the outer
ring and position the centering ring as shown in the figure.
Then fix the two flanges with the clamps or claws as shown in the
figure.
360/400 TPS-mobile User Manual / 87-901-005-01 (F)