Connection A - High Vacuum Flange - Agilent Technologies Turbo-V 81-T Mode D'emploi

17
Technical Information
12 Roughing line with valve (optional)
13 Turbopump
14 Flexible connection

Connection A - High Vacuum Flange

To connect the Turbo-V 81-T pump to the ISO inlet flange, remove the
outer ring and position the centering ring as shown in the figure.
Figure 31
Then fix the two flanges with the clamps or claws as shown in the
figure.
Figure 32
Turbo-V 81-T User Manual / 87-900-984-01 (E) 217/228