Letter Protocol Description - Agilent Technologies TPS-mobile 9698400 Notice De Mode D'emploi

17 Technical Information

Letter Protocol Description

Letter Protocol Description

The default protocol is "Window"
Communication format:
▪
▪
▪
▪
Communication protocol:
Host = Master
Controller = Slave
The communication is performed in the following way:
Host
Request is an ASCII character identifying the action that must be
performed by the controller or the requested information.
Allowed ASCII characters:
▪
▪
▪
▪
370/400
8 data bit
no parity
1 stop bit
The baud rate is programmable via front panel from 600 to 9600
baud. The controller is factory-set for 9600 baud operation.
Turbo-V Controller
"A" = START
"B" = STOP
"C" = Low Speed ON
"D" = Low Speed OFF
TPS-mobile User Manual / 87-901-005-01 (F)