Use - Agilent Technologies TPS-mobile 9698400 Notice De Mode D'emploi

Use

This paragraph details the fundamental operating procedures.
Make all electrical an pneumatic connections are properly connected
before the use of the system. While heating the vacuum chamber, the
temperature of the inlet flange must not exceed 120 °C with ConFlat
flanging and 80 °C with ISO flanging.
WARNING! Never use the pumping system when the turboinlet flange is not connected to
the vacuum chamber or is not blanked.
WARNING! Do not touch the turbopump or any of its accessories during the heating
process. The high temperatures may cause burns.
WARNING! Avoid impacts or harsh movements of the pump when in operation. The
bearings may become damaged and damages to the persons or the things
could be taken place.
TPS-mobile User Manual / 87-901-005-01 (F)
Instructions for Use

Use

327/400
16