Installation And Commissioning Pneumatic Installation; Wiring Connections On The Control Head; Pneumatic Installation - Burkert 1066 Instructions De Service

I C
NSTALLATION AND OMMISSIONING

Pneumatic installation

Wiring connections on the control head

G 1/4
Compressed
air
Plug-and-socket connections
for 6/4 mm or 1/4" hose
plug-in
for valves V1, V2 and V3
ATTENTION!
• Only use calibrated hose lines with 6 mm or ¼ " external diameter.
• Only cut these using a hose cutter (danger of damaging the hose).
• Select the length of the hose so that the control head can be removed with the
• Take care to ensure a tension-free hose guide well aligned with the plug connector,
16 - 1066
G 1/4
Exhaust air
screw fitting.
since hoses that are plugged in when tensed (contorted) may lead to leakages at
the plug connection.