K Factors (In Pulse/L); Installation And Wiring; Safety Instructions - Burkert 8071 Manuel Utilisateur

Installationandwiring
6.4.

K factors (in pulse/l)

Flow rate range
0,5 - 50 l/h
2 - 100 l/h
15 - 500 l/h
If the 8071 sensor is combined with an electronic device
which does not automatically convert the K factors, make
the conversion using one of the following formulae:
K factor in imp/gallon US = K factor in imp/l x 3,785 to
obtain flow rate in gallon US / time unit
K factor in imp/gallon UK = K factor in imp/l x 4,546 to
obtain flow rate in gallon UK / time unit.
Type 8071
K factor (pulse/l)
1552
1000
400
7.

insTAllATion And WiRinG

7.1.

safety instructions

danger
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure before
loosening the process connections.
Risk of injury due to electrical discharge.
• Before starting work, switch off the power supply and secure it
to prevent restarting.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of hazardous products.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid before loosening the process
connections.
• Keep all easily flammable material away from the device.
english
11