Electrical Installation; Control Heads Without Communication; 8-Pole Screw Terminal For 24 V Dc - Burkert 1066 Instructions De Service

Electrical installation

Control heads without communication

There are different ways of electrically connecting control heads without communication.
On the model for 24 V DC, status per valve is displayed uniformly with an LED in each case.

8-pole screw terminal for 24 V DC

(in interior of housing, cable duct with screw fitting for cable)
LED status display 24 V DC
Layout of the 8-pole screw terminal
NOTE
The outputs of the proximity switches are pnp-plus switching and are short-circuit proof.
I
NSTALLATION AND
Ground
Switched signal of the external
proximity switch S3
Power supply
V = valve
S = proximity switch (sensor)
C
OMMISSIONING
1066 - 17