Multipol (8-Pole Round Plug To Din 45326) For 24 V Dc; X 6-Pole Screw Terminals For 24 / 110 / 230 V Uc - Burkert 1066 Instructions De Service

I C
NSTALLATION AND OMMISSIONING

Multipol (8-pole round plug to DIN 45326) for 24 V DC

View of the sensor installed in the head, seen from the front looking at the pins, with the solder
connections below.
(common earth for valves)
NOTE
The outputs of the proximity switches are pnp-plus switching and are short-circuit proof.

2 x 6-pole screw terminals for 24 / 110 / 230 V UC

The 2 x 6-pole screw terminal model consists of:
Cable gland with screw fitting for cable
Max. 1 valve (Type 6106, DN1.2)
2 mechanical limit switches with potential-free contacts for position feedback
(No LED status display)
Printed circuit board with 2 x 6-pole screw terminals for 24 / 110 / 230 V UC
18 - 1066
Outputs of the proximity switches
pnp-plus switching and are short-circuit proof
Proximity switch 2
Proximity
switch 3
GND
Valve 3
Valve 2
Proximity
switch 1
24 V DC
(operating voltage for the
proximity switches)
Valve 1
gn/gb
bl
sw
green/yellow
blue
black