Setting Of The Cars´ Basic Speed; Setting Of Cars´ Braking Performance; Setting Fuel Tank Capacity; Deactivating Settings Keys - Carrera DIGITAL 124 Instructions De Montage Et D'utilisation

1 LED lights = no display
2 LEDs light = display at the Position Tower
Set the function requested and confirm your choice via "START/
ENTER".
Setting of the
cars´ basic speed
1 – 10
1
3
2 1
5
7 8
4 3
The setting of the basic speed can be effected individually for one
and/or several cars. The cars which are to be adjusted have to be
5 6
positioned on the track. The setting can be carried out on 10 levels
with the 5 LEDs indicating the different levels by flashing or perma-
nent lighting.
1 LED lights = low speed
1
5 LEDs light = high speed
2
Switch on the Control Unit, place the cars to be adjusted on the
track and press "SPEED" 5 once. A certain number of LEDs will
now light, showing the speed level last used. Push the "SPEED"
button 5 as many times until you have reached the speed desired.
Confirm by pressing "ENTER/START"
the lighting of the middle LED confirms completion of the setting,
fig. .
6
Setting of cars´
braking performance
1 – 10
1
3
2 1 5
5
7 8
4 3
(only for cars operated with speed controllers)
The setting of the braking performance can be effected individually
5 6
for one and/or several cars. The cars which are to be adjusted have
to be positioned on the track. The setting can be carried out on 10
levels with the 5 LEDs indicating the different levels by flashing or
permanent lighting.
1 LED lights = low braking effect
1
5 LEDs light = high braking effect
2
Switch on the Control Unit, place the cars to be adjusted on the
track and press "BRAKE" 6 once. A certain number of LEDs will
now light, showing the brake step last used. Push the "BRAKE" but-
ton 6 as many times until you have reached the braking perfor-
mance desired. Confirm by pressing "ENTER/START"
running light and the lighting of the middle LED confirms completion
of the setting, fig. .
6

Setting fuel tank capacity

1
1 – 10
2
3
5
4 3
3
4 5
5 6
5 6
4
(only for cars operated with speed controllers)
6
The setting of the fuel tank capacity in combination with the Pit Lane
5
(20030356) is effected for all cars simultaneously. The setting can
be carried out on 10 levels with the 5 LEDs indicating the different
levels by flashing or permanent lighting.
1 LED lights = low fuel capacity
1
2 1
5 LEDs light = full tank
2
Switch on the Control Unit, place the cars to be adjusted on the
track and activate the fuelling function by means of the slide switch
7 8
2 , fig.
LEDs will now light, showing the fuel capacity last used. Push the
"FUEL" button
capacity desired. Confirm by pressing "ENTER/START"
running light and the lighting of the middle LED confirms completion
of the setting, fig
Extended fuelling function
You can choose between 3 modes via the sliding switch
fig. :
3
3 . A short running light and • OFF = cars don´t consume any "petrol"
• ON = cars consume "petrol"
• REAL = maximum speed depending on fuel tank capacity / cars
consume "petrol") (only in combination with Pit Lane 20030356 or
Pit Stop Lane 20030346 and Pit Stop Adapter Unit 20030361)
When driving in "REAL-mode" the car with a full tank is "heavier",
drives slowlier and shows a lower braking effect; a car with an empty
tank is "lighter", drives faster and shows a higher braking effect. The
current fuel tank capacity and the "fuel consumption" can only be
displayed in combination with the Driver Display 20030353 and Pit
Stop 20030356.
1 – 10
2
Refuelling of cars with Pit Lane 20030356
and Driver Display 20030353
Pit Lane 20030356
3
2
4
6 7
7
6
2 1
9
7 8
The car´s present tank capacity can be read via the bar display with
5 green and 2 red LEDs at the Driver Display. For refuelling drive
your car into the Pit Lane across the refuelling sensor fig.
bar display now starts to flash, fig.
by keeping the lane-change button pushed. fig.
refuellings are indicated by flashing or lighting of the yellow LEDs,
fig. (also see Driver Display).
10
Note: cars with an empty tank are disregarded for lap-counting
in combination with Position Tower 20030357.
3 . A short
1 – 10 1 – 10
2
3
4
6 7
2 1
2 1
6
7 8
7 8
3 2
6 7
. Press the "FUEL" button 7 once. A certain number of
3
7
as many times until you have reached the fuel
.
6
4 3
5 6
4 3
5 6
Driver Display 20030353
1
8
8
4 3
10
5 6
4 3
, and the car can be refuelled
8
. The number of
9
5 6
Setting of tank capacity at the start of the race
Pit Lane 20030356
11
2
1
4 3
8
13
5 6
1
(only in combination with Pit Lane 20030356 and Driver Display
20030353)
Irrespective of the basic setting of the tank capacity it is possible
to individually set the tank capacity for one or several cars at the
8
race´s start for the number of laps till the first pit stop. Push "START/
ENTER" once 3 ; the 5 LEDs at the Control Unit will light perma-
nently, fig. , and the Driver Display´s bar display will flash, fig.
12
Clicking the lane-change button at the corresponding speed control-
ler enables you to change the fill level, fig.

Deactivating Settings Keys

4 3
3 . A short
1
5 6
2 1
2 ,
3
7 8
2 1
To deactivate the keys for setting Speed, Brake and Fuel, proceed
as follows: Hold down the Code Key:
7 8
While holding down the Code Key
then release the Code Key. To reactivate the above keys, repeat the
procedure just described.

Extended Pit Lane function

Pit Lane 20030356
1
2 1
3
7 8
2 1
. The
7
5
7 8
(only in combination with Pit Lane 20030356)
It is possible to activate/deactivate the lap counting function in the Pit
Lane 20030356 or Pit Stop Lane 20030346 with the Pit Stop Adapter
Driver Display 20030353
12
2 1
14
7 8
.
13
.
14
2
7 8
8
, turn on the Control Unit and
3
2
5 6
3
4
5 6
6
4 3
5 6 7
15
2