Cleaning; Operation Faults; Disposal Of Unit At The End Of Its Working Life; Guarantee - Porkka BC 720 SH Instructions D'emploi Et Montage

CLEANING AND MAINTENANCE
Clean spillages immediately.
Ensure effective operation of the equipment and the quality of
the stored products by defrosting and cleaning the equipment
once a month at least.
Remove all food and store it in a back-up store.
Switch off the unit from the main electrical power
switch and take off the electric wire from the wall socket.
Remove shelves and GN rails as well as drawers and runners
(and shelf support uprights).
Wash the stainless steel surfaces of the equipment by a mild
detergent mixed with water *, e.g. dishwasher detergent
or other suitable detergent. Use a cloth or a paper towel to
prevent scratching.
RINSE WITH A DAMP CLOTH, DRY AND ALLOW THE
CABINET TO DRY OUT.
* DO NOT USE DETERGENTS OR DESINFECTANTS
CONTAINING CHLORINE, SOLVENTS, SCRUBBING
PRODUCTS, A KNIFE OR OTHER SHARP TOOLS.
DO NOT USE RUNNING WATER TO WASH THE CABINET.
REFER TO THE PRODUCT DESCRIPTION OF THE
DESINFECTANT TO SEE WHICH MATERIALS IT IS
SUITABLE FOR. DO NOT LET IT SPLASH ON SENSITIVE
PARTS, SUCH AS THERMOSTAT REGULATOR OR DOOR
HINGES. DRY THE EQUIPMENT AFTER THE
DESINFECTION AND LET IT VENTILATE.
Clean the condenser and/or condenser fi lter.
Clean the cabinet door gasket using a mild water soluble
detergent and check the condition of the gasket. A silicone
spray makes the gaskets fl exible and dirt-rejecting.
Cleaning in dishwasher is not recommendable for the loose
parts of the equipment.
Put back all removed parts and switch on the equipment.
Ensure that the temperature has become to the normal level
before using the equipment again.

OPERATION FAULTS

If the cabinet fails to cool and prior to calling service check that:
- the power supply is switched on.
- the defrost is not on
- the device has not been over-loaded.
- the air circulation for the condenser is free
- The ambient temperature around the cabinet is not too
high.
If the cabinet makes a strange sound:
- Make sure there is no objects restricting the evaporator fan
motors working properly.
- Make sure that the cabinet does not rock when pushed from
one or other of the front corners.
- Check that things such as bottles in the cabinet are not
knocking against each other.
If the malfunction cannot be corrected by checking the above
mentioned points, prevent the spoiling of the goods by moving
them to another cooling unit. Switch the faulty cabinet off and
contact your dealer or service company.

DISPOSAL OF UNIT AT THE END OF ITS WORKING LIFE

Once the unit is no longer required and requires disposal it may
not be just thrown away as the unit does contain WEEE-waste.

GUARANTEE

Check the guarantee period at your merchandiser.
The guarantee does not cover faults caused by
-transportation
-overloading or users negligence
-negligence due to not reading manuals, proper care and
maintenance
-changes in current (max ± 10% allowed) caused for example
by lightning etc.
-modifi cations or repairs performed by an unauthorized service
agent
-use of parts not supplied and approved by the manufacturer
The guarantee does not cover
-incidental scratches/marks or other minor faults caused when
unpacking or during installation that does not effect operation
or performance of the equipment
THE MANUFACTURER OR HIS SELLING AGENT IS NOT AT
ANY TIME, OR UNDER ANY CIRCUMSTANCES LIABLE FOR
FOOD LOSS HOWSOEVER IT OCCURS. THE OWNER /USER
SHOULD ENSURE THE CONTENTS ARE INSURED AT ALL
TIMES.
ALL GOOD ARE SUPPLIED UNDER OUR TERMS AND
CONDITIONS OF SALE A COPY OF WHICH MAY BE
OBTAINED UPON REQUEST.
9