Oil Pressure Switch - Yamaha F15MHX Manuel D'entretien

ELEC
P
IGNITION CONTROL SYSTEM
P
SERVICE POINTS
PULSER COIL
Refer to "IGNITION SYSTEM".

OIL PRESSURE SWITCH

1. Measure:
9 Oil pressure switch continuity
Out of specification → Replace.
Mity vac:
YB-35956/90890-06756
Oil pressure switch continuity
pressure:
14.7 kPa (0.15 kg/cm
2.13 psi) and above
14.7 kPa(0.15 kg/cm
2.13 psi) and below
LOW-OIL-PRESSURE WARNING
LAMP
1. Disconnect the oil pressure switch lead
connector (P).
2. Start the engine.
3. Ground the oil pressure switch lead
(P).
4. Check:
9 LED
Does not light → Replace.
8-18
E
2 ,
No continuity
2 ,
Continuity