POWR
MANUAL STARTER (MH MODELS)
1
SERVICE POINTS
Sheave drum removal
1. Rotate:
9 Sheave drum
Turn the sheave drum clockwise until
the spring is free.
NOTE:
9 Turn the sheave drum so that the cutaway
on the outer surface of the sheave drum
faces towards the starter handle.
9 Pass the starter rope through the cut-
away.
2. Remove:
9 Drive plate
9 Sheave drum
w
8 When removing the drive plate and
sheave drum, be sure to turn the sheave
drum upside down to prevent the spiral
spring from popping up at you.
8 Do not leave the sheave drum removed.
The spiral spring may pop out.
Spiral spring removal
1. Remove:
9 Spiral spring 1
w
Be careful because the spiral spring may
pop out during removal. Remove it by let-
ting it out one turn of the winding each
time.
5-4
E