Setting Menu Entries, General - Fronius Primo 3.0-1 Instructions De Service

R e l a y
Example: "WiFi Access Point" menu item
Exiting an entry
G R A P H
If no key is pressed for 2 minutes:
-
-
-
Setting menu en-
1
tries, general
2
3
The available settings are displayed:
4
5
The inverter switches from wherever it is on the menu level back to the "NOW" display
mode (exception: "Standby" Setup menu entry),
The display backlighting goes out.
The amount of energy currently being fed in is displayed.
Open the desired menu
Use the 'Up' or 'Down' keys to select the desired menu item
Press "Enter"
Use the 'Up' or 'Down' buttons to se-
lect the desired setting
Press the 'Enter' key to save and ap-
ply the setting.
To discard the setting, press the 'Esc'
key.
Use the "Up" and "Down" keys to
3
move between the available entries
To exit a menu entry, press the
4
"Back" key
The menu level appears
The first digit of a value to be set flash-
es:
Use the 'Up' or 'Down' keys to select
4
a value for the first digit
Press "Enter"
5
The second digit of the value flashes.
Repeat steps 4 and 5 until ...
6
the whole value to be set flashes.
23